MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board

  • MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board
MacBook Pro 15" Retina (Mid 2012-Early 2013) MagSafe 2 DC-In Board

USD39.99

USD39.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Detalles del Producto

Descripción

Descripción

Replace a broken or damaged MagSafe DC-in board for your Mid 2012 or Early 2013 MacBook Pro 15" Retina with this part. This part connects wall adapter power to logic board.

Compatibilidad

Compatibilidad

  • MacBook Pro 15" Retina A1398 Mid 2012 to Early 2013

Especificaciones

Especificaciones

Part #:
923-0096

Compatibilidad

Cuentos de Reparación

Avatar de usuario

Mi Problema

My magsafe was burnt due to not unplugging the charger when 100%.

Mi Solucion

Everything was easy to find thanks to great photos in the guide. Dropped the screws underneath the logic bosrd a couple of times but I carefully shaked them out and back at it.

Mi Consejo

As ZIF cables can be tricky to put back in place. (Especial . . .

Avatar de usuario

Mi Problema

The battery was not charging, the green led sometimes was on, sometimes off. With the new magsafe2 board the battery begins to charge, the led changes from green to orange. But there is one problem. When the computer is turned on, the led turns off and the computer remains working maintained only by . . .

Avatar de usuario

Mi Problema

MacBook Pro was no longer charging, there was charring. Something was wrong with my original MagSafe connector.

Mi Solucion

It went great! The iFixit walkthrough was very helpful. I have done this sort of thing, so I was comfortable with it.

Mi Consejo

Print out the instructions, and then tape the screws to them with clear . . .

Avatar de usuario

Mi Problema

MacBook not charging

Mi Solucion

The repair went pretty smoothly. The trickiest part was removing the keyboard ribbon cable. The instructions were not clear to show the actual location of the section that you have to flip up. With patience it wasn't too difficult to figure out. The project tray came in very . . .

Mostrar más