MacBook Pro 15" Unibody Early 2011 Parts
Partes que funcionan con MacBook Pro 15" Unibody Early 2011:
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
MacBook Pro 15" Unibody (Early 2011-Mid 2012) Replacement Battery
Replacement battery, compatible with all Early 2011, Late 2011, and Mid 2012 15" Unibody MacBook Pros.
Macbook Pro Unibody Lower Case Screw Set
Replace a stripped or missing screw securing the lower case of most Unibody model MacBook Pro laptops. The excluded models are the Late 2008 and Early 2009 15" MacBook Pr...
Arctic Silver Thermal Paste
3.5 gram Arctic Silver thermal paste tube. Thermal paste forms a continuous, conductive layer between a processor and its heat sink, improving cooling performance and kee...
Arctic Silver ArctiClean
Two part thermal paste remover. Two part cleaner used to dissolve thermal paste and purify the surfaces of heat sinks and processors before applying new thermal paste. In...
MacBook Pro Unibody 13" and 15" MagSafe DC-In Board
This assembly connects the wall adapter power to the logic board. It is compatible with all Mid 2009 13" Unibody MacBook Pros, all Mid 2010 13" Unibody MacBook Pros, all ...
PC3-10600 8 GB RAM Chip
Replacement or upgrade RAM chip. Specs: 8 GB / PC3-10600 / Low Profile / 204 pin, 1333 MHz. This speed upgrade will make your computer faster. Compatible with All Mid 201...
Apple MagSafe 1 AC Adapter
Replace a broken or damaged Apple MagSage 1 AC adapter with this part.
Unibody Laptop Dual Drive
Increase the storage space in your laptop by replacing the optical drive with a second hard drive or SSD.
MacBook and MacBook Pro (Non-Retina) SSD Upgrade Bundle
Upgrade the storage and improve boot time and read/write speed in your MacBook and MacBook Pro (Non-Retina) with this SSD upgrade bundle.
Info de Dispositivo
The Early 2011 version of MacBook Pro 15" Unibody features an upgraded graphics chip and a new quad core Core i7 processor with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The most common repairs with Early 2011 model MacBook Pro 15" Unibody laptops are replacing a dead battery, replacing a malfunctioning left or right fan, and upgrading the hard drive or RAM. The MacBook Pro 15" Unibody (Early 2011) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.
The Early 2011 model MacBook Pro 15" Unibody requires a Tri-point Y0 Screwdriver to remove the battery. Our battery repair kits include all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 15" Unibody Early 2011 repair guides for step-by-step instructions on how to make the fix.