Menú
Tus configuraciones
Cancelar
Este producto no está disponible en tu país.
Codigo del Articulo: IF300-092-1
Este producto no está disponible en tu país.
Condición: Usado
USD34.99
Descuento de iFixit Pro aplicado. Reg:
USD34.99
Partes usadas A-Stock están en excelente condicion
Partes B-Stock tienen un desgaste cosmético de menor importancia
Partes C-Stock tienen un mayor desgaste cosmético, pero son totalmente funcionales
USD34.99
Descuento de iFixit Pro aplicado. Reg:
USD34.99
Agotado
Listo para Enviar
Agotado
Listo para Enviar
No tenemos mucho stock disponible
¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!
Visita Nuestra TiendaDetalles del Producto
Descripción
Descripción
Replace most of the internal electronics for a GoPro Hero4 Black action camera.
El Ensamblado de Partes Incluye
El Ensamblado de Partes Incluye
Cuentos de Reparación
Unit would not power on or charge
Smooth except for plugging the smaller ribbon cable back in. That is short and there is little room for small pliers
Do not try to pull the three wire plug straight out. Follow the guide and push down on it. There are pins keeping it from being pulled straight out. For the narrow ribbon cable, use a very thin pliers or straighten it out and push the motherboard down on it while bracing the back of the ribbon with a narrow screwdriver to keep it from bending. It took me quite a number of tried to get it to slip in
Unit would not power on or charge
Smooth except for plugging the smaller ribbon cable back in. That is short and there is little room for small pliers
Do not try to pull the three wire plug straight out. Follow the guide and push down on it. There are pins keeping it from being pulled straight out. Fo . . .
Had a chip in the lens and microphone issues. Reached out to GoPro and they wouldn't repair, they offered me 20% towards a new go pro but they wanted my GoPro.
Thanks to iFixIt for stocking the parts reasonably priced was able to drop the mother board assembly in without an issue and my GoPro is revived!
Use tweasers to connect the tiny ribbon cable. I did not have them with me, if I did the repair wouldve been a lot quicker.
Had a chip in the lens and microphone issues. Reached out to GoPro and they wouldn't repair, they offered me 20% towards a new go pro but they wanted my GoPro.
Thanks to iFixIt for stocking the parts reasonably priced was able to drop the mother board assembly in without an issue and my GoPro is revi . . .
