Xbox 360 Zephyr Parts
Partes que funcionan con Xbox 360 Zephyr:
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
Xbox 360 Red Ring of Death Fix Kit
Fix kit for Xbox 360 consoles with the "Red Ring of Death" (RRoD) failure. Replace, reattach, and reclamp the heat sinks on your Xbox 360. Usually fixes a RRoD Xbox—als...
Xbox 360 RF Module
This small circuit board houses the electronic power button and LED status lights.
Xbox 360 Bottom Vent
This gray plastic perforated vent covers the bottom face of the Xbox 360.
Xbox 360 Motherboard Screw Set
This set of screws secures the motherboard to the chassis.
Xbox 360 CPU Heat Sink
The heat sink is responsible for cooling the central processing unit.
Xbox 360 Upper Case Screw Set
This set of screws secures the upper case to the chassis.
Xbox 360 Eject Button
Replace the plastic eject button.
Xbox 360 Dual Fans (Late Models)
Replace the dual cooling fans with power cable and three-pin connector for late model (all except Xenon) Xbox 360 consoles.
Info de Dispositivo
The Xbox 360 Zephyr was the second revision of the Xbox 360, released in May 2007. This revision featured an updated motherboard and improved heat sinks. These changes were made to prevent the Red Ring of Death that was common on the Xenon revision of the 360. This revision also added a HDMI port to the console.