Xbox 360 Xenon Parts
Partes que funcionan con Xbox 360 Xenon:
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
Xbox 360 Red Ring of Death Fix Kit
Fix kit for Xbox 360 consoles with the "Red Ring of Death" (RRoD) failure. Replace, reattach, and reclamp the heat sinks on your Xbox 360. Usually fixes a RRoD Xbox—als...
Xbox 360 Upper Case
Replace the plastic outer casing covering the top half of the Xbox 360.
Xbox 360 Lower Case
Replace the plastic outer casing covering the lower half of the Xbox 360.
Xbox 360 Bottom Vent
This gray plastic perforated vent covers the bottom face of the Xbox 360.
Xbox 360 X Clamps
Replace the two X clamps for securing the CPU and GPU heat sinks.
Xbox 360 CPU Heat Sink
The heat sink is responsible for cooling the central processing unit.
Xbox 360 Chassis
Replace the stamped steel chassis that provides structural support inside the Xbox 360.
Xbox 360 Eject Button
Replace the plastic eject button.
Info de Dispositivo
The Xbox 360 Xenon was the first revision of the Xbox 360. Unfortunately, the Red Ring of Death has been a very common problem with this revision of the 360. This revision also lacked the HDMI port found on later Xbox 360 models.