PlayStation 4 (CUH-10XXA and CUH-11XXA) Fan

  • PlayStation 4 (CUH-10XXA and CUH-11XXA) Fan
  • PlayStation 4 (CUH-10XXA and CUH-11XXA) Fan
PlayStation 4 (CUH-10XXA and CUH-11XXA) Fan

Condición: Usado

USD23.99

USD23.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

Detalles del Producto

Descripción

Descripción

Replace a malfunctioning cooling fan. This fan is compatible with a CUH-10xxA or CUH-11xxA model PlayStation 4 console.

This is a used OEM part.

Nota

This part is not compatible with CUH-12xxA model PS4.

Compatibilidad

PlayStation 4
CUH-10XXA
CUH-11XXA

Cuentos de Reparación

Omar Santiago's Story Photo #1333851

Mi Problema

I had to replace the battery since mine was not charging anymore and I was NOT going to pay Apple's $500 amount. They were charging me that much for the battery replacement and trackpad cleaning. I came back home purchased the 64 bit driver kit, spudger and tweezers. In total I spent about $100 incl . . .

Mi Problema

I wanted the magnets and the platters. I'm not repairing anything why are you asking me about that? If anything I was destroying stuff, not that the hard drives worked anyway.

Mi Solucion

uh, I got some magnets? And some platters?

Mi Consejo

no not really.

Mi Problema

VERY, VERY EASILY. (Oops! Have my caps lock on.) I've been using iFixit for year and years. Helped me replace the power inverter for the display on my old Dell 10 yrs ago (so simple and so inexpensive!), before I got fed up with Microsoft (track pad not working & someone at MS actually told me, from . . .

Mi Problema

The battery was swollen and the trackpad had been pushed up out of the chassis. The bottom of the laptop was bowed out.

Mi Solucion

I purchased the iFixit Driver Kit to get the drivers I needed to take the back off and to remove the computer. I then installed the battery I bought from iFixit. My computer is work . . .

Mi Problema

Needed to destroy storage on old phone before it's sent to recycling

Mi Solucion

The "Repair" as it is hasn't happened yet because when you open up the Moto G, everything is covered in metal panels. I wanted to drill into whatever was the storage area before sending the phone off to recycling so that nefarious p . . .

Mi Problema

The factory battery began to expand and was causing problems.

Mi Solucion

Very easy and simple. Just needed the right screw driver bit.

Mi Consejo

Nope.

Mi Problema

My Gamecube C-Stick was drifting in games.

Mi Solucion

Will be quick

Mi Consejo

With the proper driver I could unscrew the triangle screws holding together controller. I noticed that a new C-stick is needed. Now all I need to do is replace the C-stick with a similar stock item.

Mi Problema

This is what we do..

Mi Solucion

as it should

Mi Consejo

Never give up.

Mi Problema

After we moved into our new house, our PS3 would overheat within seconds of powering it on.

Mi Solucion

After following the steps for the full teardown, I was able to see that the thermal paste needed to be replaced in two spots. After carefully removing the old paste and replacing, it powered on and worked like . . .

Mi Problema

I had to remove a large heatsink from my CPU to replace the CPU, hwoever Hyper 212 evos arte notorious for being less than steller with their X bracket mount despite otherwise being an awsome cooler. So I purchased the 64 peice driver set and it worked amazingly. Arrived a day later than expected bu . . .

Mostrar más