Introducción

Complete teardown of Sidekick II

Este desmontaje no es una guía de reparación. Para reparar tu Sidekick II, utiliza nuestros manuales de servicio .

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
  • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

  • Gently pry open button and remove button.

  • Do this for each of the 3 buttons remaining.

Agregar Comentario

The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
  • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

Agregar Comentario

Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.
  • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Agregar Comentario

Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
  • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

  • Use the Torx 6 screwdriver to remove these 2 screws.

  • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Agregar Comentario

After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
  • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

  • You can use your hands to simply pull apart the top casing from the bottom casing.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove screen from casing. Remove screen from casing.
  • Remove screen from casing.

Agregar Comentario

Remove 4 screws from back of screen using Torx 6 Screwdriver. Pry screen out of casing using fingers.
  • Remove 4 screws from back of screen using Torx 6 Screwdriver.

  • Pry screen out of casing using fingers.

Agregar Comentario

Remove 4 screws from front of screen with Phillip screwdrivers. Peel off the metal covering on the back of the screen. Be careful when taking off the metal covering. The orange ribbon will not come out all the way, and it is fragile.
  • Remove 4 screws from front of screen with Phillip screwdrivers.

  • Peel off the metal covering on the back of the screen.

  • Be careful when taking off the metal covering. The orange ribbon will not come out all the way, and it is fragile.

Agregar Comentario

Remove the protective cover in front of the screen.
  • Remove the protective cover in front of the screen.

  • Do not use metal tools, you may damage the protective cover or the screen. Use your fingers only.

Agregar Comentario

Take the screws out using the Torx 6 screwdriver. Then lift the thumb wheel and housing off of the front panel.
  • Take the screws out using the Torx 6 screwdriver.

  • Then lift the thumb wheel and housing off of the front panel.

Agregar Comentario

Remove 2 black "rivets" from back of casing with the plastic opening tool. Press keyboard out of front of casing using thumbs.  Don't press too hard as you may break the board.
  • Remove 2 black "rivets" from back of casing with the plastic opening tool.

  • Press keyboard out of front of casing using thumbs. Don't press too hard as you may break the board.

Agregar Comentario

Remove the 5 black screws with a Phillips head screwdriver. Lift the bottom of the control board from housing, and separate the two.
  • Remove the 5 black screws with a Phillips head screwdriver.

  • Lift the bottom of the control board from housing, and separate the two.

Agregar Comentario

Carefully remove battery and back plate.
  • Carefully remove battery and back plate.

  • Do not use metal tools, you may damage the control board. Use only your fingers.

Agregar Comentario

Here are all of the pieces that you have disassembled
  • Here are all of the pieces that you have disassembled

Agregar Comentario

michael albaum

Miembro Desde 20/01/10

45 Reputación

11 Guías creadas

Equipo

Cal Poly, Team 3-19, Maness Winter 2010 Miembro de Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Miembros

11 Guías creadas

nice job from a former geek

Jared Boies - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 9

Últimos 30 Días: 14

Todo El Tiempo: 6,390