Introducción

This is a quick teardown of the playstation move controller.

Este desmontaje no es una guía de reparación. Para reparar tu PlayStation Move, utiliza nuestros manuales de servicio .

Playstation Move Controller
  • Playstation Move Controller

Agregar Comentario

Remove the 4 screws holding the back over and trigger button on.
  • Remove the 4 screws holding the back over and trigger button on.

Agregar Comentario

Once open you will see two ribbon cables. The one connected to the trigger button is removable.
  • Once open you will see two ribbon cables.

  • The one connected to the trigger button is removable.

  • The ribbon cable attached to light globe is soldered on.

Agregar Comentario

Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated. Light Globe Cover and the LED Module can be separated.
  • Light Globe Cover and the LED Module can be separated.

Agregar Comentario

The battery can easily be removed. There is connector on the side of the board.
  • The battery can easily be removed. There is connector on the side of the board.

  • Battery Specs: Single Cell 1380 mAh 3.7 Volt

  • Sony Part: LIS1441

Agregar Comentario

Remove the inner plastic (1 Screw) frame to expose the logic board
  • Remove the inner plastic (1 Screw) frame to expose the logic board

  • Remove the 2 top screws and one bottom screw to remove the logic board from the controller.

Agregar Comentario

Logic Board Chip Closeups Included 503A 04c ALPS - Radio Module
  • Logic Board

  • Chip Closeups Included

  • 503A 04c ALPS - Radio Module

  • AKM8974948D - MEMS Gyroscope

Agregar Comentario

mcwiggin

608 Reputación

4 Guías creadas

AKM 8974 - 3-axis Electronic Compass

Xeno - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 6

Últimos 30 Días: 49

Todo El Tiempo: 12,364