Herramientas Destacadas en este Teardown

Este desmontaje no es una guía de reparación. Para reparar tu Morphy Richards Iron, utiliza nuestros manuales de servicio .

This is the iron we will take apart.
  • This is the iron we will take apart.

Agregar Comentario

First remove the rear or the iron using the flathead screwdriver.
  • First remove the rear or the iron using the flathead screwdriver.

Agregar Comentario

Next remove the cable bridge bracket.
  • Next remove the cable bridge bracket.

Agregar Comentario

Next remove the screws from the base. (see arrows for location)
  • Next remove the screws from the base. (see arrows for location)

Agregar Comentario

Next remove the screw the hold the top on.
  • Next remove the screw the hold the top on.

Agregar Comentario

To free the long cable remove from terminal block at rear.
  • To free the long cable remove from terminal block at rear.

Agregar Comentario

At the front of the iron pull out the buttons for the steam and water.
  • At the front of the iron pull out the buttons for the steam and water.

Agregar Comentario

Next unclip the button holder (red circle) by undoing the screws (black circle)
  • Next unclip the button holder (red circle) by undoing the screws (black circle)

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Next remove the bridge clip from the arrows position.
  • Next remove the bridge clip from the arrows position.

Agregar Comentario

Next remove the inner button (black circle)
  • Next remove the inner button (black circle)

  • Now remove the centre screw (red arrow)

Agregar Comentario

slide off the cable holder from the cable.
  • slide off the cable holder from the cable.

Agregar Comentario

Disassemble the plug
  • Disassemble the plug

  • First remove the casing.

  • Now remove the wires from the pins.

  • Next remove the pins.

Agregar Comentario

Remove front of the iron by undoing the screw  (arrow) by first taking off cover cap.
  • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

Agregar Comentario

Next take out round selector, this is simply clipped so can be pulled out with pliers.
  • Next take out round selector, this is simply clipped so can be pulled out with pliers.

Agregar Comentario

Next remove the washer parts at the front of the iron.
  • Next remove the washer parts at the front of the iron.

  • Take the tubing off.

من فضلكم كيفة افك الجزءالامامي من الحديد

douahiahmed - Contestar

Remove the seals for the water pump.
  • Remove the seals for the water pump.

  • Now take pumps out.

Agregar Comentario

Remove the screw (circled) this will lead to the separation of the base and the top.
  • Remove the screw (circled) this will lead to the separation of the base and the top.

Agregar Comentario

Remove the top of the iron to reveal the under parts.
  • Remove the top of the iron to reveal the under parts.

  • Now remove the rubber seals from the plate.

  • Take out the screws linking to the stainless steel base.

Agregar Comentario

Remove the terminal block from the wires.
  • Remove the terminal block from the wires.

  • Next take off the black section of the iron.

Agregar Comentario

Now remove the screws from the steel base.
  • Now remove the screws from the steel base.

Agregar Comentario

Next remove each individual part ( mostly wiring)
  • Next remove each individual part ( mostly wiring)

i need THERMASTER wher shell i get

KRISHNA NANA MOHITE - Contestar

All parts at the end of the process.
  • All parts at the end of the process.

Agregar Comentario

RIchard fox

Miembro Desde 17/03/10

251 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 15

Últimos 7 Días: 69

Últimos 30 Días: 306

Todo El Tiempo: 17,964