« Volver a Todos los Cuentos

2009 Macbook Pro 2.8 Core 2 Duo will not recognize hard drive

michaelcasebeer -

MacBook Pro 15" Unibody 2.53 GHz Mid 2009

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Hard Drive/IR Sensor Cable Replacement

Moderate

Mi Problema

Macbook Pro running very slow and near constant spinning beach ball of death so decided to upgrade to an SSD. Installed a 480 Corsair GS but Macbook would not recognize drive. Search lead to: http://www.gcsdblogs.org/roodhouse/?p=25...

Replaced SATA cable and works incredibly. Also the spinning beach ball of death is gone. I think the SBBOD problem was due to the SATA cable all the time as I tested it with my old spinning drive as well.

Mi Solucion

Ordered pentalobe screwdriver at the same time as cable. Followed ifixit.com install instructions. Super easy!

Mi Consejo

Monkey see...Monkey do! Much less expensive than a new Macbook Pro! I now have an extra $2500 for Xmas. So long and thanks for all the fish!

Imagen Spudger
Spudger

$2.99

Imagen Phillips #00 Screwdriver
Phillips #00 Screwdriver

$6.99

Imagen P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery
P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery

$8.99

Imagen MacBook Pro 15" Unibody (Mid 2009-Late 2011) Hard Drive Cable
MacBook Pro 15" Unibody (Mid 2009-Late 2011) Hard Drive Cable

$44.99

« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario