Saltar al contenido principal
« Volver a Todos los Cuentos

iPhone 4 power and sensor cable replacement

thfries -

iPhone 4

iPhone 4 Battery Replacement

iPhone 4 Battery Replacement

5 - 30 minutos


Mi Problema

The power/sleep button on top of my iPhone 4 had stopped working. It didn't click anymore, and only worked if you pushed down on it VERY hard.

Mi Solucion

The repair took some time--almost 3 hours, I think. You have to remove a lot of the insides of the phone to get to the cable. I got a little nervous looking at all the parts sitting on my desk, but they all went back in. Have patience.

Mi Consejo

I followed someone else's advice of putting the pieces (ESPECIALLY the screws) on a clean sheet of paper and labeling them. This was very helpful. If you wear reading glasses, I would recommend getting some kind of hands-free magnifier/light so you can get a good view of what you are working on. This was a very rewarding repair. The part was $20--a lot cheaper than replacing the phone.

Imagen Spudger


Imagen Phillips #00 Screwdriver
Phillips #00 Screwdriver


Imagen Flathead 3/32" or 2.5 mm Screwdriver
Flathead 3/32" or 2.5 mm Screwdriver


Imagen Tweezers


Imagen iPhone 4 Replacement Battery
iPhone 4 Replacement Battery


Imagen iPhone 4 (GSM/AT&T) Power and Sensor Cable
iPhone 4 (GSM/AT&T) Power and Sensor Cable


« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario