« Volver a Todos los Cuentos

Fulfilling but unsuccessful (and in the end, needless) surgery

sean -

iPhone 4

iPhone 4 Vibrator Replacement

20 - 40 minutos

Moderate

Mi Problema

After a heavy fall on its head my iPhone 4's ringer and vibrate ceased working. I had this repaired but the repair only lasted a month before the problem returned. I ordered what I thought would be the parts I needed would be from iFixit and had a go myself.

Mi Solucion

It was totally nerve racking as I didn't have much small electronics experience but the guides were clear - some sections could have had more / clearer photos. But I successfully replaced the vibrate motor and ringer switch. I should have replaced the headphone, ringer, volume control connector strip I think though because the problem wasn't solved when I put it all back together.

Mi Consejo

It took me about 3 hours to do. Lost a screw too. Get that magnetic mat! In the end I jailbroke the phone and installed a software ringer switch which turned on the audio so now I can hear the phone ring. But the vibrate motor is still not doing anything. Might have another go at some point.

Imagen Essential Electronics Toolkit
Essential Electronics Toolkit

$19.99

Imagen iPhone 4 (GSM/AT&T) Vibrate/Ring Switch
iPhone 4 (GSM/AT&T) Vibrate/Ring Switch

$4.99

Imagen iPhone 4/4S Liberation Kit
iPhone 4/4S Liberation Kit

$9.99

« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario