Saltar al contenido principal
« Volver a Todos los Cuentos

Soggy home button

huber83 -

iPhone 3GS

iPhone 3GS Front Panel Assembly Replacement

iPhone 3GS Front Panel Assembly Replacement


Mi Problema

The phone got wet and the home button stopped working.

Mi Solucion

After getting the phone put back together. I noticed the protective film on the inside of digitizer. I had to take the phone back apart and remove the film. During this process I bent and broke one of the home button spring contacts. After a short temper tantrum, I taped the contact to the end of the spudger and soldered it back in place. The repair worked, my wife has her phone back and the world did not end.

Mi Consejo

The screws that hold the LCD in place are stupid small. I would suggest sending a couple spares. Then make a ifixit refrigerator magnet. That could double as and advertizement and a screw keeper while taking the phone apart.

Imagen Spudger


Imagen Metal Spudger
Metal Spudger


Imagen Suction Handle
Suction Handle


« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario