« Volver a Todos los Cuentos

I fixed it myself!

anastasiagolovin -

iPod 5th Generation (Video)

iPod 5th Generation (Video) Headphone Jack & Hold Switch Replacement

20 - 40 minutos

Moderate

Mi Problema

My iPod was only playing in mono. I tried several sets of headphones, tried cleaning the jack, then found iFixit.

Mi Solucion

This is the first time I've ever tried to fix anything electronic, so it was pretty daunting at first. The step-by-step instructions and photos were really helpful. I had some trouble getting the iPod open, because I was being too careful, I think. I finally got it open after I got mad and twisted the opening tools a little. Everything else was smooth sailing. It took me about 30 minutes just to get the thing open, and then another 20-30 minutes to complete everything and put it back together.

Mi Consejo

I would get an extra set of the opening tools, because by the time I got the iPod open, both my sets were broken. Also, when it says to "wiggle" the tools, you should actually twist them slightly, to about a 30-45 degree angle. It helps to leave one tools wedged in while working on the next side of the iPod.

Finally, those screws are SUPER tiny. Be very careful about picking them up, moving them, etc., because if you drop one you will never ever find it again.

Imagen Phillips #00 Screwdriver
Phillips #00 Screwdriver

$6.99

Imagen iPod Video 30 GB Headphone Jack & Hold Switch
iPod Video 30 GB Headphone Jack & Hold Switch

$29.99

« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario