Saltar al contenido principal
« Volver a todos los relatos

Quick and easy MBP HD replacement

willschultze -

Mi Problema

Hard drive going to hell. 5 years is a good long life.

Mi SoluciĆ³n

Replaced MBP original HD with Crucial MX550 SSD, pretty simple. The external USB to SATA adapter was flawless, cloned the dying drive in about 2 hours, swapping the drives took about 20 minutes. Would have gone quicker had I had the T6 Torx driver I didn't know I needed to remove the set screws from the drive...but that's my fault for not reading the steps all the way to the end first. Pliers got the job done, no harm no foul. Thanks, iFixit.

Mi Consejo

Read your steps. And get a can of air to clean out your filthy innards if you haven't remembered to do that. I got my trackpad click back just by blowing out the dust--bonus!

Imagen de Universal Drive Adapter
Universal Drive Adapter

$24.99

Imagen de P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery
P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery

$5.49

« Volver a todos los relatos

0 comentarios

Agregar Comentario