screen blacks out but still works

Question

MacBook Core 2 Duo

Modelo A1181: procesador Core 2 Duo de 1.83, 2, 2.1, 2.13, 2.16, 2.2 o 2.4 GHz

Preguntas 1203 Ver todo

crooney66 @crooney66

Rep: 1

Publicado: 13 de ago. de 2012

Opciones

screen blacks out but still works

I'm have the same issuse a lot of people are having with the older macbook now. screen goes black. you can still see image slightly and pushing the display brightness buttons do nothing. if i close the lid almost all the way the screen comes back, but if i open it all the way again in goes black again(sometimes) other times it works just fine. using an external display works fine too. does anyone now what exactly is going on? inverter cable, inverter, or something else?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

2 Respuestas

Solución Elegida

mayer @mayer

Rep: 685.3mil

MacHale Enterprises

3.4mil

1.1mil

2.6mil

Publicado: 13 de ago. de 2012

Opciones

First hook it up to an external monitor. The fact that it comes on when closing the lid indicates a severed inverter cable. I would not get a used cable to repair this, get a new one, otherwise your problem may return quickly. It's Apple part number 922-7612 http://www.welovemacs.com/9227612.html

Fue útil esta respuesta?

Sí No

Puntuación 3

4 comentarios:

Here's how to replace it: MacBook Core 2 Duo Inverter Cable Replacement

13 de ago. de 2012 - de mayer

I have the external screen hooked up as a secondary screen. when the lid is up it still functions as so. with the lid closed it will favor the external. however if I close the lid 3/4 of the way the screen comes back on(only at that angle) and doesn't shut off. it has never flickered. if I fuss with it enough I an get the lid all the way open with the screen working. eventually it goes black sometimes it stays on just fine

14 de ago. de 2012 - de crooney66

Hi Mr Mayer

On boot up the apple logo and the status bas show briefly very faint, then brighten, fade and then all goes black

Somewhere I read there is a start up screen driver then an apple one

the external screen works well,

System - display still shows lcd working etc

any pointers,

is there any diagnostics I can run ?

30 de jun. de 2017 - de Dave Buchanan

Do exactly what I said in my original answer. This appears to be an inverter issue.

30 de jun. de 2017 - de mayer

Agregar un comentario

Here's how to replace it: MacBook Core 2 Duo Inverter Cable Replacement — mayer
I have the external screen hooked up as a secondary screen. when the lid is up it still functions as so. with the lid closed it will favor the external. however if I close the lid 3/4 of the way the screen comes back on(only at that angle) and doesn't shut off. it has never flickered. if I fuss with it enough I an get the lid all the way open with the screen working. eventually it goes black sometimes it stays on just fine — crooney66
Hi Mr Mayer

On boot up the apple logo and the status bas show briefly very faint, then brighten, fade and then all goes black

Somewhere I read there is a start up screen driver then an apple one

the external screen works well,

System - display still shows lcd working etc

any pointers,

is there any diagnostics I can run ? — Dave Buchanan
Do exactly what I said in my original answer. This appears to be an inverter issue. — mayer