Saltar al contenido principal

Versión CDMA del iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben reemplazarse como una unidad. Compatibilidad de 16 o 32 GB / Modelo A1349 / CDMA.

Preguntas 295 Ver todo
Pregunta Cerrada

Are pentalobe screws still good after removed?

i was replacing the back of my iPhone to make it red, i put the new back in and tried to put back my pentalobe screws but they wouldn't go back, is this supposed to happen, do i need to buy Phillips screws instead??

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Yes, just like any other screw, as long as the correct bit is used to remove it, it will go back in just fine. Did you use a proper pentalobe screwdriver, or something else as a stand-in? Our iPhone liberation kit uses a standard star bit to remove the pentalobe screws, which strips them, which is why we then include Phillips screws to replace them.

Imagen de P2 Pentalobe Screwdriver iPhone

Producto

P2 Pentalobe Screwdriver iPhone

$5.99

Fue útil esta respuesta?

Puntuación 1

1 comentario:

I ordered a new backing, it was sent with two screwdriversmid didnt know which was which and i think i used the wrong one

- de

Agregar un comentario
Respuesta Más Útil

Check if the new back cover is seated properly. Screw should go back in provided that its head is not damaged when you removed it. Use the correct screw driver to remove screws.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,902