Rep: 1
1
WHat size are the screws? Or what do I order. I literally JUST replaced the USB charging port and while NOT MOVING ANYWHERE at all, I lost 4 screws - even though I had a tray that I was working in to NOT lose them. There must be a ghost
Es esta una buena pregunta?
Rep: 860.7mil
1.4mil
976
2.4mil
@saraniimuller if you are referring to the sub_board (Daughter board, charging board), there should only be 3 screws holding that one on. The screws sizes for that are M1.4 x 3.3 mm PH#00
Fue útil esta respuesta?
"Use a Phillips screwdriver to remove the five 4 mm-long screws securing the motherboard bracket to the frame."
But are they a standard width and thread?
@saraniimuller those are M1.4 as well but the thread size is 3.5mm. The total length of the screws is 4mm but to purchase screws you need to know the thread and the length of the thread which is M1.4 x 3.5 Samsung part number for those is 6001-003427 I would consider purchasing one of those screw sets that you can get at places like eBay or AliExpress etc. might just be cheaper than the original part number pieces.
Ultimas 24 horas: 0
Ultimos 7 días: 2
Ultimos 30 días: 13
Todo El Tiempo: 251
