CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

Preguntas 421 Ver todo

How to fix a sunk in power button

So, my iPhone4 was perfectly fine until a couple weeks ago. I took it out of my pocket and I discovered that the power button had "sunk" in. It still functions; however, there is no click or resistance when I press it down. I have to push a lot harder in order for it to properly work. I have take then entire phone apart in order to attempt a fix, but I cant figure it out. The power sensor cable seemed perfectly fine (the yellow 'nub' was still intact). Any suggestions on what I can do to restore the original function and regain the clicking?

Any help would be greatly appreciated.

also, theres no water damage nor has the phone been dropped.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

1 Respuesta

Respuesta Más Útil

Unfortunately that is a common problem on the iphone 4.

The problem is that originally there is a small black 'dot of plastic' on top of the switch (on the flex) which activates the switch when you press.

Most likely this black dot has disappeared from your switch. The best way to solve this is to replace the power and sensor flex assembly:

iPhone 4 CDMA/Verizon Power and Sensor Cable

Imagen iPhone 4 CDMA/Verizon Power and Sensor Cable

Producto

iPhone 4 CDMA/Verizon Power and Sensor Cable

$19.99

Fue útil esta respuesta?

Calificación 3
Agregar un comentario

Añadir tu respuesta

Christian estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 6

Todo El Tiempo: 22,945