Rep: 5
2
1
I bought SSD drive "Toshiba THNS128GG4BMAA for apple macbook air Rev B&C" (Ebay)
I installed it into my MB543LL (late 2008) instead old Samsung HDD. But Apple disk utilites does not see this drive and i can not format or install OS
Is there a way to make this SSD visible by Apple disk utilite ?
Es esta una buena pregunta?
Rep: 685.2mil
3.4mil
1.1mil
2.6mil
The drive is probably a 3GB and needs to be slowed down to 1.5 GB to be seen. See if the drive has jumper pins and try 1&2 or 3&4.
Fue útil esta respuesta?
is there a jumper on this SSD ?
I don't know, look at it.
no jumpers on Toshiba THNS128GG4BMAA
Contact Toshiba to see if it can be slowed down or if it is compatable: http://www.toshiba.com/tai/support_consu...
Were you able to find a cable that will work with that drive?
Fue útil esta respuesta?
Rep: 5
2
1
you can use the same original cable. Just flip hdd to connect (Toshiba THNS128GG4BMAA must be connected not like original hdd) - inverted
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 1
Ultimos 30 días: 1
Todo El Tiempo: 1,957
1 comentario
i find answer myself. This SSD must be connected by inverted hard drive cable
- de Andre