Saltar al contenido principal

Lanzamiento el 21 de septiembre de 2018. Modelos A1920, A2097, A2098, A2100. Disponible como GSM o CDMA/eSIM o nano-SIM/64, 256, o 512 GB/ Plateado, Dorado o Gris Espacial (Pronunciado "iPhone 10 S.")

Preguntas 398 Ver todo

My screen isn't responding to touch after water was splashed on it why

My baby splashed water on my phone surface and I quickly dried it and checked if water entered the speakers and charging port and water didn't enter it. My screen guard was broken so a little water was in between the screen and screen guard so I removed the screen guard and cleaned the screen. My phone was working fine for 30 minutes then the screen stopped responding. Everything is working, the screen is fine but isn't responding to touch. Please how can I fix this?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1

1 comentario:

The only diy repair without repairing anything is to remove the back cover and separate the battery from phone and lay them out on a dish placed on a gas stove having a pilot light, gas oven with pilot light warming the oven, on top of a hot water boiler, sunny window or outside sunny spot; all gently warming the phone to slowly evaporate any remaining moisture. Allow several hours or more for warmth to evaporate tiny amounts of moisture not removed by hand, Q-tip, isopropyl alcohol or tissue. 24 hours of gentle heat should be enough, then reassemble and hope for the best.

- de

Agregar un comentario

1 Respuesta

It is possible that when the water splashed the screen it probably broke the digitizer which is what registers when and where you touch the screen. So you probably need to replace the screen.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Preciousjames estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 24