Rep: 1
1
3
Hi,
Everytime I replace a digitizer and/or screen/digitizer on any ipod touch (any gen) the digitizers never go back on 'flush' they always start popping back up usually at the top. It has to be something i'm not doing right. can anyone help me please?
I have included a picture (uploaded to photobucket) so you can see what i mean.
http://i203.photobucket.com/albums/aa159...
Thanks for looking
Aaron
Es esta una buena pregunta?
Rep: 9.6mil
16
15
16
if the adhesive is not holding while drying, Try wrapping the device with a few rubber bands while it drys can help.
if the itouch is not being put together correctly then you can ignore my answer above.
Fue útil esta respuesta?
Rep: 25
3
1
Make sure you have all the screws in the proper holes, also check and see if the battery might have some air in it and it will push up on the metal shielding. Could also be bent corner or glass still on the sides.
- Lloyd
Fue útil esta respuesta?
thanks for the suggestions but none seem to apply in this case. i'm thinking maby the adhesive i use isnt probably too strong. il try some better adhesive and see what happens.
thanks for your reply
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 1,158
2 comentarios
Did you ever fix this problem? I keep having the same exact thing happen to me. Let me know.
Thanks
Jay
- de Keith
Yeah, The battery was bulging a bit, so I put a small hole in the sticker of the battery to let the trapped air out.
- de lloyd