Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1158 Ver todo

No service after a small "repair", what gives?

I put my iPhone 3G back together after removing the power button, I removed it because it was damaged and then I used led to act as a solder to keep the phone in an 'ON' position. Only problem is that now, the phone says No Service always. Did I ruin something?

Also, I have Wifi so does that mean the antenna isn't damaged?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Respuesta Más Útil

You might have messed up the SIM card assembly, try removing the SIM card, cleaning it's contacts, and reinserting it.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

The WIFI antenna is in the upper part of the phone - the Cellular antenna is at the back of the dock connector assembly! They have nothing to do with each other.

I found a great tutorial on the net. Maybe it will help you!

"How I recovered my iPhone's lost GSM signal!"

http://www.mauron.net/iphonerepair/

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

henry estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 6,822