Saltar al contenido principal

Número de modelo A1707. Lanzado en junio de 2017, este MacBook Pro presenta procesadores Kaby Lake de hasta el procesador Intel Core i7 de cuatro núcleos a 2.8 GHz con Turbo Boost de hasta 3.8 GHz.

Preguntas 327 Ver todo

My MacBook Pro's usb c ports are killing my devices

Hello everyone.

I got a friend's MacBook Pro (15 inches, 2017) today, the MacOSX was damaged so I formatted and install high sierra on it, I mounted an iso image on a USB and connect it to a USB C hub, and all the progress went just fine.

After finishing the setting up, I expulsed the hub, the next time I connected the USB c hub with a USB the Mac alert me with a message that "USB Accessories Disabled" and my hub led went off, I tried to reconnect it another laptop and computers but it doesn't work again.

I asked the owner about it, he told me that got 2 external hard drives damaged after using them in the Macbook.

Does everyone have this problem before?

I searched on the internet about it but I can't find anything about it.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

1 Respuesta

Respuesta Más Útil

The first thing I would do is have a good look at the ports themselves. You will want to take them out to inspect. Use the Battery Replacement Guide up to step 49 to get your logic board out. The USB C boards are held in with 2 T5 screws and should pull right out once you get the board out. Beyond that, this could be a board level issue. I would give that a good look as well. Check for anything that looks out of place, damaged, burnt, etc...

Feel free to attach pictures to your original post and we can take a look!

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Luis Medina estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 5

Ultimos 30 días: 9

Todo El Tiempo: 57