Saltar al contenido principal

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

How To get stripped screws of my iPhone?

i got my vibrator screws stripped , how can i get them out?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

4 Respuestas

Solución Elegida

You have 3 options that I can think of. We have a screw extractor set or screw extracting pliers, you can drill the screw out (not pretty), or you can dremel a slot into the screw head and use a flat head screwdriver (also not pretty). Any of these three methods will work fine, but keep in mind that the dremel and drill will put the phone through considerable vibration and a slip could mean more damaged parts.

Hope this helps, Good Luck!

Imagen de Precision Screw Extractor Set

Producto

Precision Screw Extractor Set

$24.99

Imagen de Screw Extracting Pliers

Producto

Screw Extracting Pliers

$19.99

Fue útil esta respuesta?

Puntuación 4
Agregar un comentario

I've had success taking the smallest dab of epoxy/super glue and letting it cure for a minute or so.

if you want to ghetto up the phone a little bit, grab a screw from the connector shield directly to the left as you'll need at least one screw in the vibrator.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Will this work for my droid x main screen screw?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Use a small left-handed drill bit... it bites into the head and removes the screw.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Ofek Ohana estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 12,309