Saltar al contenido principal

Repair and service information related to the ResMed AirSense 10 CPAP machine. Also known as the ResMed Air10.

Preguntas 27 Ver todo

My humidifier heater isn't working.

My Airsense 10 is about 2 years old. My humidifier heater quit. I pulled the cover and checked the fuse and it is good. I don't have a schematic to check the test points. Could you give me some info on the heater?

Thanks!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

Yes this is the fuse under the heater plate. I unclipped it to test its continuity.

- de

Agregar un comentario

1 Respuesta

Respuesta Más Útil

Bg Higg by checked the fuse I assume your are referring to the one under the heater unit like shown on here Data on the heater is not freely available so I would go ahead and replace the heater on use a bench power supply to see if that could run the heater.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Bg Higg estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 13

Todo El Tiempo: 292