Rep: 25.8mil
205
20
38
I have a very minor case of water damage on a MacBook Pro A1989 it also has no burned components but has capacitors and resistors missing from previous repair attempts does by a different shop any ideas/advice on this MacBook as I’ve never worked on a device the new before only the oldish mbps and airs
Any advice would be greatly appreciated
Thanks:)
Es esta una buena pregunta?
Rep: 9.5mil
33
18
65
First try to reflow the solder on the port.
Fue útil esta respuesta?
Thanks for the answer it really helps but the ports on this MacBook are the ones that are on a flex cable:)
Thanks again
Ultimas 24 horas: 0
Ultimos 7 días: 1
Ultimos 30 días: 8
Todo El Tiempo: 407
11 comentarios
Thanks for the reply it is greatly appreciated:)
- de HelloMacOS
@hellomacos did you find the problem
- de daniel
@tech_ni
Hi
I kind of found the problem
There are components missing on the board
But the video that you recommended pointed me towards the CD3215 chips but I didn’t really know how to test them
- de HelloMacOS
do you need brd and schematics ?
- de daniel
I think I have them but I don’t have a reader that can read them so I have no way no f confirming that
- de HelloMacOS
Mostrar 6 comentarios más