Rep: 1
1
I replaced LCD and broken glass, in the process I might damaged connector 3 and maybe other parts of the board.
When I close the IPhone, the screen display ok, the battery is charging, but the touch screen is working only on the left half side - I cannot scroll right to the end to unlock the phone.
What can be wrong? Should I need to replace the whole board?
Es esta una buena pregunta?
Rep: 781.5mil
1.1mil
893
2.3mil
Always double check your connection and make sure they are seated right and that you did not end up bending a pin or similar. Of course also make sure you have the right part and did not get the 3G part. If any and all of this works out okay, I would think that it is your digitizer. Usually, if it is something on the logic board, you have an overall non-functioning digitizer. If part of the digitizer is not responding, it is the digitizer that needs to be replaced. Hope this helps, good luck.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 912
