2g touchscreen not responding

Question

iPhone 1ª Generación

El primer modelo de iPhone, modelo A1203 con 4, 8 o 16 GB de capacidad y una parte posterior de aluminio. La reparación requiere una cantidad significativa de destreza, y puede requerir un poco de soldadura.

Preguntas 224 Ver todo

Pregunta Cerrada

Robin Loor @robinloor88788

Rep: 1

2

1

Publicado: 30 de nov. de 2011

Opciones

2g touchscreen not responding

Are the 2G iPhone and the iPhone 1st Generation the same? This link calls it 1st Gen ( http://www.ifixit.com/Answers/Ask/iPhone... ). In any case, I believe I have a 2g, and the touch screen does not respond to touch. I understand that the digitizer and screen are 2 in 1 and that I need the complete part(s) but do not see it on your site, nor the blue prying tools. Can you and me the link to the tools? I saw them yesterday for $2.95 or so.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

1 Respuesta

Solución Elegida

Botch job Ray @suitslayer

Rep: 251

3

Publicado: 1 de dic. de 2011

Opciones

not worth fixing..cost too much for the parts.

as the front and lcd and glass are all one unit.

will cost you around £170 and are getting rare now.

Fue útil esta respuesta?

Sí No

Puntuación 0

1 comentario:

Thanks. The problem this 2g is that the touchscreen did not respond to touch ( now wont turn on at all). I read omewhere within this site that the connector might be loose. I tookit all apart, and as soon as one of the cable loosen up, the screen went off. Mind that I could not turn it off due to the screen not responding, or sliding off. It was a fustrating to take apart, so I'll try once more and see if in fact reconnecting everything will fix it, otherwise, it may be just worth recycling. Thanks again.

2 de dic. de 2011 - de Robin Loor

Agregar un comentario

Thanks. The problem this 2g is that the touchscreen did not respond to touch ( now wont turn on at all). I read omewhere within this site that the connector might be loose. I tookit all apart, and as soon as one of the cable loosen up, the screen went off. Mind that I could not turn it off due to the screen not responding, or sliding off. It was a fustrating to take apart, so I'll try once more and see if in fact reconnecting everything will fix it, otherwise, it may be just worth recycling. Thanks again. — Robin Loor