Repara tus cosas Comunidad Tienda

La Canon EOS 60D es una cámara DSLR (réflex digital de lente única) de 18 MP con una pantalla LCD articulada. La cámara fue lanzada en agosto de 2010 y se identifica por la EOS 60D impresa en la parte frontal de la cámara.

Preguntas 56 Ver todo

Opciones

Canon EOS60D USB Interface Board Replacement.

My Canon EOS60D was on a tripod with USB cable in place. Tripod was knocked over and camera landed on the Port side, meaning that the USB plug hit the floor first. Since then the USB connection has not worked although all other camera functions are fine including HDMI interface and remote trigger.

Is it possible to replace the USB interface board and if so, how? I’ve looked at your guides and none go as far as accessing the USB board.

Thanks in advance

Harry Watson

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hello!

Thankfully (since cameras are so pricey) they are generally repairable. However, parts can be difficult to find, especially for a camera of this age. Have you tried contacting either Canon support, or a local camera store? They will likely have parts, or be able to repair the board themselves. If they cannot, you could try to solder a new USB connector to the PCB. In the meantime (or if you determine it isn’t possible, too expensive, or too risky to try and fix the USB) try removing your SD card and read the data off of it.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

All this is good advice. Thanks for answering.

- de

Agregar un comentario

Añadir tu respuesta

Harry Watson estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 149