Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1500 Ver todo

How to replace Home button flex cable

Does anyone know how to repair the flex cable for the home button. One of the spring-loaded contacts broke which I fixed with a spot of solder and a small metal prong. However I am banking it won't last forever so would like to replace the flex cable at some point.

The bit I need to replace is this

http://www.digiexpress.us/iPhone-3G-Home...

I am guessing I'll need to get the plastic button out then insert this through the hole in the top case, but how does the home button pop out?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

The home button is held in by the glass digitizer - there are tabs on the left and right sides of the button.

This picture has a pretty good view:

http://s1.guide-images.ifixit.com/igi/RI...

So, if you need to replace the home button itself, you are going to have to remove the digitizer, and will need these to adhere it back in place:

[producto vinculado inexistente o deshabilitado: IF137-006]

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

solarisjon estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 12,528