Touch ID failed after a screen replacement but the home button works.

Question

iPhone 6

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Nicholas Hoi @nicholas_hoi

Rep: 1

2

1

Publicado: 15 de jul. de 2021

Opciones

Touch ID failed after a screen replacement but the home button works.

I don’t know this has been answered or not but today I repaired my grandmom’s iPhone 6. After replacing the screen, the touch ID stopped working but the home button function still works. Does this have to do with the back shield connector from the touch ID sensor to the Motherboard or the Touch ID is gone forever?

Upon further inspection, the touch ID sensor seems fine and I’m very careful at pulling it out from the old screen.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

2 comentarios

In settings is the fingerprint greyed out or will it let you try to set it up?

15 de jul. de 2021 - de Chris Stables

it would let me enable but it says failed afterwards

16 de jul. de 2021 - de Nicholas Hoi

Agregar un comentario

2 Respuestas

Solución Elegida

Chris Stables @imicrosoldering

Rep: 50.7mil

8

14

101

Publicado: 17 de jul. de 2021

Opciones

I would try replacing the home button flex cable as it might be damaged. You can purchase the flex and back plate for around $5.00 or just the flex for less.