Rep: 1
1
Hello,
a little while ago my Earl 2013 MBP the back light stopped working upon investigation I believe it’s a 1.5GB Nvidia 660m doesn’t show up at all in the system there is no kernal panics the only issue is the backlight it’s temperamental
Es esta una buena pregunta?
Rep: 479.3mil
35
329
971
Most likely you have some corrosion damage either on the logic board display connector
Or within the displays connection (very difficult to get to)
Follow this guide to at least checkout your logic board connection MacBook Pro 15" Retina Display Early 2013 Display Assembly Replacement Follow Steps 1 through 4 to disconnect the battery, then jump down to Step 11. How does the contacts and solder joints look? Post some clear pics if you’ve not sure Agregar imágenes a una pregunta existente.
Guía
Dificultad:
Difícil
—
1 - 2 hours
Guía
Dificultad:
Muy fácil
—
2 - 5 minutes
Fue útil esta respuesta?
Hey Dan I have done extensive checking for corrosion and there is none as for the other connector it’s all secure and no problems there
@peach production - Plug in an external monitor with either the HDMI or Thunderbolt ports. Is that display working without a problem?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 1
Todo El Tiempo: 53
This series came in two configs with and without a discreet GPU, AMD GPU (DG) vs intergraded Intel graphics engine only (IG)
IG Models: MacBookPro11,2
DG Models: MacBookPro11,3
So lets not get lost on the different graphics this series offers as that doesn't involve the backlight.
- de Dan
Thank you Dan for getting back to me I will check it in a moment
- de peach production