Saltar al contenido principal

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2375 Ver todo

What part do I replace for a sleep button that won't click?

My iPhone is out of warranty, and recently the Sleep/Power button no longer 'clicks' when pressed, and has stopped working. Is it the metal power button that needs replaced or the electronic switch that is part of the cable? Which part actually produces the 'click'? I can't see any parts between the cable and the button where the click would normally occur, so unsure which part I need to swap out!

Any help would be much appreciated!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

3 Respuestas

Respuesta Más Útil

The button is just a...well...button. It doesnt make the clicking noise itself, but just allows you to conveniently push the tiny button buried inside the phone. You may have jammed the button actual button (the yellow bit on the cable). See if you can possibly unjam it. If the button seems to be operating freely, you need to replace the power and sensor cable.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Buy a new cable.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I repaired a power button on a 4 for a client who had dropped her iPhone on the button itself and it no longer "clicked", and it also cracked the screen. The button on the inside of the phone should have a tiny orange "nub" on it which produces the click. Sometimes they fall off so I removed the cable with the button assembly and saw that hers was still there, but it would not work. Also the assembly appeared to be bent at the midpoint so I straightened it best I could and put a couple layers of tape on the button to build it up a little more. I used a hole punch to make the tape pieces round, and they fit just right. After reassembling, the button worked satisfactory.... (iPhonesfixed)

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

David estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 9,238