Saltar al contenido principal

Anunciado el 16 de octubre de 2014, identificable por el número de modelo A1347 y EMC 2840.

Preguntas 198 Ver todo

Mac Mini late 2014 won't start after I replaced the hard drive

I followed this guide and loosened the logic board with a bent coat hanger (it was really hard to loosen it). After reassembly the Mac Mini doesn’t start at all. I wonder if I’ve damaged the logic board? I’ve disassembled it once more and tested the new SSD in another computer, it works, and reassembled it again, still doesn’t start. I’ve attached a photo of the logic board.

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

1 comentario:

Hi,

Did you ever get it to work? I have the same problem now.

Thank

- de

Agregar un comentario

1 Respuesta

I would double check the power connector. From the picture of a small part of the logic board I don’t see anything that I would think would stop normal operation.

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

Alright, no I don't think there's any problem with the power connector. I think there might be damage on the other side of the logic board perhaps..

- de

Can you try turn it on without HDD/SSD and without cable what is connected to HDD/SSD ?

- de

Agregar un comentario

Añadir tu respuesta

Fredrik Gynnhammar estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 81