Saltar al contenido principal

El Google Pixel 2 es el segundo teléfono insignia de Google, lanzado el 17 de octubre de 2017. El teléfono cuenta con una pantalla AMOLED de 5 pulgadas y viene con opciones de almacenamiento de 64 o 128 GB. Está disponible en tres colores: Just Black, Clearly White y Kinda Blue.

Preguntas 70 Ver todo

Why does the screen keep lifting up?

I replaced the battery and display in my Pixel 2. Put everything back together, went great. Screen works.

BUT. The screen keeps lifting up. I used brand new adhesive and made sure all the old adhesive was removed. Took it apart, re-set everything again with new adhesive, but it still keeps lifting up.

It’s almost like either the battery itself is too thick, or the cable on the back of the new display is too thick? Has anyone else had this problem?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3

1 comentario:

I tried putting in the old display with new adhesive when I replaced the battery. The battery works well but the upper right corner of the display does not seat well and comes up less than 1/16 inch. I bought a new display and the same thing happened. The screen works except after making a call the screen goes blank! I can talk but can’t hang up because there aren’t buttons (the screen is blank). Sometimes, I can briefly recover the screen and hang up by applying pressure with my thumbs on the opening at the top of the phone for the speaker.

- de

Agregar un comentario

1 Respuesta

What adhesive did you use and did you do anything to “cure” it?

In my shop I use the black Tesa tape whether it’s pre-cut for a specific device or I use the rolls of adhesive. I’ll heat the device up with a heat gun and then use a few small Irwin Quick Grip clamps to apply pressure and it works really well. Also when you apply the adhesive, make sure you don’t touch it. The oils from your skin can have a negative affect on the adhesive. You can also try 3m adhesive promoter. But WHATEVER you do, for the love of God, DO NOT USE SUPER GLUE.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

I used the pre-cut adhesive twice and the tesa tape once. I did not heat it up to cure it, though I did put a book on it overnight to try to get it to set. It was okay for a day and then after that no good.

Do you know if I should remove the black film on the backside of the replacement screen? Context here: Cómo reemplazar una pantalla Google Pixel 2 (that should link you to my comment on the guide)

Thank you for your help!!

- de

Agregar un comentario

Añadir tu respuesta

Raquel Smith estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 12

Todo El Tiempo: 633