Repara tus cosas Comunidad Tienda

Lanzado en abril de 2010 / 2.4, procesadores Core i7 de 2.53 GHz o procesadores Core i7 de 2.66 GHz

Preguntas 591 Ver todo

Opciones

Replaced HD cable but HD not showing up

So we partially broke the input connector on the logic board that holds the HD cable. Attached are pics of the mistake made. The HD still spins and the HD cable still lights up but the HD is not being read.

Is it possible for the HD cable to get power from

the board while the drive is not being read? Very weird. When we plug in the HD cable to the MLB the HD starts spinning but is not being read.

Block Image

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Ouch! This is not good ;-{

Clearly you managed to damage enough of the pins so the drives data signals, yet the power connections are working.

At this point you’ll need to find someone with good micro soldering skills and access to the needed part to fix your logic board.

Where do you live? Country and nearest city. Maye we can aim you to someone local to you.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

Thanks a lot for your response @danj

You actually helped us confirm that the HD can be read while with limited signal strength per the broken pins. We ended up just swapping it out with another 2010 and we are good to go. Thanks a lot for taking the time.

Ted

- de

Agregar un comentario

Añadir tu respuesta

Ted Teske estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 29