Repara tus cosas Comunidad Tienda

Lanzamiento el 21 de septiembre de 2018. Modelos A1920, A2097, A2098, A2100. Disponible como GSM o CDMA/eSIM o nano-SIM/64, 256, o 512 GB/ Plateado, Dorado o Gris Espacial (Pronunciado "iPhone 10 S.")

Preguntas 374 Ver todo

Opciones

Water Damage 5 days ago and screen is back to normal

Hi,

Dropped my phone in the water right at the shore and picked it back up. It was working and I went home to update and it bricked the phone. Did a DFU mode and I got 4013 error. The flood illuminator sensor seems to be damaged(apple logo loop) and my screen was flickering so I removed the screen and flex cable for the flood illuminator. 5 days later the screen is working okay with some minor issues like sometimes the 1 button on the keyboard takes multiple tries to press. I ordered a new screen before I checked my original screen. Should I swap in the new screen or refund it? Also I wont be able to have face ID which is no biggie. Will probably swap in the flood illuminator once my new flex cable sensors come in. Should I keep the original screen or no?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

The problem with a phone that has water damage is you never know when it will quit. I would get your data off the phone as soon as possible. Once they are wet they start to corrode and it gets worse if electricity is going through it. You need to see if it got wet on the motherboard. You need to pull the board out and split it and check it out and see if there is any corrosion. I personally wouldn't trust it and would get your important data off of it as soon as possible.

Fue útil esta respuesta?

Sí No
Puntuación 2

3 comentarios:

Toredown the internals and I do not see corrosion on the motherboard, cameras, battery or sensors. My flood illuminator is damaged which renders the face id unlock useless. Is there a repair service that would transfer the original floor illuminator to a new flex cable? I have no experience in soldering.

- de

Backed up all my data to icloud and my local computer.

- de

You can find people who can transfer the flood sensor ic to a new cable. Look on Facebook for the page microsoldering for beginners. There are a few experienced guys like jesse Cruz or you can check with jessa at ipad rehab ipadrehab.com or Jason at sts telecom ststelecom.com. I don't know if most people are doing that repair because it's a chance that it won't work. So check around because I have heard of people doing it.

- de

Agregar un comentario

Añadir tu respuesta

Gordon Samuel estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 194