I have a dishwasher that looses power to the door/controls fairly frequently. I have only found that unplugging the door wiring and then plugging it back in fixes the problem, which is quite annoying. Is there anything I am missing that could fix this problem?
Es esta una buena pregunta?
Rep: 448.3mil
11
366
1.4mil
Hi,
What is the make and model number of the dishwasher?
Have you checked the door harness connectors/plugs for corrosion or to see if the connections are OK or if there may be a loose wire or even a damaged wire further down in the harness where it may flex etc you didn't say?
If they appear to be OK then by unplugging the harness you may be resetting the control board so perhaps it is a problem there. You may have to inspect the board for any obvious component problems.
Fue útil esta respuesta?
Hello, this happens after days or week not used after resetting for about 15 minutes it comes back on what do you think could be the problem.
@johnatkins@bellsouth.net
What is the make and model number of the dishwasher?
Ultimas 24 horas: 2
Ultimos 7 días: 9
Ultimos 30 días: 27
Todo El Tiempo: 1,478
1 comentario
I have a similar problem. The dishwasher runs, then stops (no lights), then lights come back on with the “start” light flashing and needs to be pushed again to start. Used to stop once per cycle, now about 10 times. Seems unlikely to be a switch problem given this behavior.
- de Robert Podolsky