I replaced the screen and it worked fine everything was perfect but I took the old screen and removed the glass and tried to see if the lcd worked and plugged it into the phone but I didn’t so I just put the screen that worked right back in and put it back but now it wouldn’t turn on at all
Es esta una buena pregunta?
Rep: 7.1mil
4
2
2
Did you disconnect the battery before you unhooked the screen and reattached it? It sounds like you might have blown the black light circuit. Probably a filter. Put on the new screen and disconnect the battery before you unhook or reattach any connections. See if iTunes will recognize the phone. If it does hit the power button and in a dark room see if you can see an image on the screen. You can also use a flashlight on it. If you have an image and iTunes recognizes it you have blown out the back light filters and need to have someone who can microsolder to repair it.
Most likely the battery should be fine. But it wouldn't hurt to try another battery to test it.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 0
Todo El Tiempo: 23
1 comentario
I’m not sure if there is light at all but i have tried a lot of times trying to connect it to iTunes but it won’t recognize it but I also had trouble with iTunes even when it worked. And would the battery still be fine if that happen
- de John