Saltar al contenido principal

Segunda generación multi -touch, ratón inalámbrico lanzado por Apple el 14 de Octubre de 2015. Modelo A1657.

Preguntas 22 Ver todo

Replacing Magic Mouse 2 Lens


From your tear down instructions for the Magic Mouse 2, I can see it is a bit difficult to get to the lens.

My mouse stopped tracking pretty much on anything except glossy magazines.

I would like to try and replace the lens optics. At least the glass top in the picture below.

Is this something anyone has ever done here?

Thank you,

Block Image

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 3
Agregar un comentario

1 Respuesta

Respuesta Más Útil

There really is nothing you can do as the clear plastic lens piece is welded to the detector chip. Taking it off would expose the laser light source element and the sensor detector which can be easily damaged. Then if its damaged what are you planing on using? This is a custom part.

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

Could this possibly be a defective sensor issue?

As in the power to the IR LED is not sufficient enough maybe and hence the detector array is unable to capture low quality reflections on a piece of paper for example?

Could it be a component issue on the either on the IR assembly or detector assembly?

So many questions. lol.

I am just curious and in the spirit of not just throwing a perfectly good mouse except the tracking issues on non-glossy surfaces like a mouse pad or A4 paper for example.

- de

Sorry, I have no answers here.

- de

Agregar un comentario

Añadir tu respuesta

ncifixnc estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 17

Todo El Tiempo: 879