Saltar al contenido principal

Modelo A1312 / Mediados de 2010 / 3.2 GHz Core i3 o 2.8 y 3.6 GHz Core i5 o 2.93 GHz Core i7, ID iMac11,3

Preguntas 382 Ver todo

Screen completely dark, external monitor works

I got this iMac used, the previous owner told me the connector to display on motherboard had broken off. I had the connector replaced by a professional repair shop, but the screen still won’t turn on. Not just backlight, the screen is completely off, not even showing in system information. (I tried to shine a flashlight into it, nothing)

If I hook it up to an external monitor, it works as the only display device, so I think the video card is fine..

Now what could be the problem? assuming the connector and display cable are working correctly (I tested every pin with multimeter)

LCD itself? Display power board?

I’d appreciate some expert opinions, thanks!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Hi

It seems, backlight is not working.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

If it's only the backlight, shouldn't the screen be detected in system information as a display device? As in, my external monitor should be an extended desktop, instead of the only desktop.

- de

Agregar un comentario

What is the tech telling you? Did you or he take any pictures of the damage? If you have pics lets see them Agregar imágenes a una pregunta existente

I’m suspecting he didn’t properly install the connector and/or there was more damage where the solder pads got pulled off so there is no electrical connection to the deeper circuits beyond the solder point on the main logic board.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

John Zheng estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 55