Saltar al contenido principal

Modelo A1174 con 2 GHz Core Duo o Modelo A1207 con 2,16 o 2,33 GHz Core 2 Duo

Preguntas 216 Ver todo

USB/Ethernet/all ports not working

The USB/Ethernet/all other ports on the back of my iMac have stopped working. I plugged a USB cable in and it touched a lamp with a short--it arced and now the USB and Ethernet don't work. The computer boots seems to work fine, but I can't interact with it via keyboard/mouse/ethernet. The airport is off so I can't try connecting via wifi.

My guess is the bus with the ports has been fried. Is this on the logic board, or is it a separate board that's easier to replace?

In addition, any ideas on how to connect/interact with the computer without the use of USB/Ethernet/Wifi?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

You're probably looking at having to replace the logic board. You may be able to get to the bluetooth by disconnecting your keyboard and starting up.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

if you have a bluetooth module, you can try using a bluetooth mouse and keyboard. your imac should ask you pair a keyboard and mouse if you have the bluetooth installed.

as for the damage, the ports are part of the logic board. i have never seen the come seperate. i would have to say

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Reed estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 922