Saltar al contenido principal

Modelo A2159, EMC 3301. Una actualización del MacBook Pro básico de 13". Disponible en plata y gris espacial. Lanzado en julio de 2019.

Preguntas 112 Ver todo

How to replace keys

Someone unfortunately spilled a shot of a sugary drink onto the keyboard and a few of the keys have got sticky on the inside. I am able to remove the keys with no problem, but I want to be able to remove the hinges and cup to give it a thorough clean however the silicone dust protector is in the way. Has anyone had success on removing the hinges/ cup without the tearing this silicone film or have any advice on how to do this? Many thanks.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

The newer butterfly keys are a real bear! I have yet to fix a key without breaking the cap! Here’s a good source 2019 keyboard parts

Frankly, I would see if Apple will replace the keyboard as the design is just not serviceable.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I had some sticky keys after a minor spill, I took the logic board out, cleaned it etc, and while it was out, poured demineralised water (tilted away from and avoiding the battery connections), let it dry, then did the same with isopropyl alcohol. Left in a warm room to dry for a few days before re-inserting logic board. Sticky keyboard, including a key that had already been giving me issues prior to the spill, went away. Hope this helps someone!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Jack Foley estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 159