Repara tus cosas Comunidad Tienda

La Xbox One S, diseñada por Microsoft Corporation, fue lanzada en Agosto de 2016. La Xbox One S es un rediseño de la Xbox One.

Preguntas 426 Ver todo

Opciones

Xbox One S switches itself off after repair

I recently spilt water on my Xbox’s fan on the top, and opened it up in order to allow everything to dry properly, disconnecting the components and inspecting them to ensure there was no water left behind. After reconnecting everything, the Xbox works but turns itself off after a few minutes due to ‘insufficient ventilation’. The fan sounds like it is running, and the Xbox is on a desktop with nothing covering it. Any ideas as to what this could be?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Just cleaving the board or drying is not enough, you should clean it with isopropyl alcohol in order to parent it from making corrosion.

and also when you take it apart one s heatsink Nirmal doesn’t come apart, you ll have to remove heatsink and see if liquid is still huddled under the heatsink( but careful as heatsink is not easily comes off if you don’t know what to do, and don’t damage the cpu while taking apart)

good luck

Fue útil esta respuesta?

Sí No
Puntuación -2

2 comentarios:

I’ve opened it again and there is no water in the heat sink and no signs of corrosion. Why might the Xbox shut down due to lack of ventilation?

- de

Clean and put thermal past.

- de

Agregar un comentario

Añadir tu respuesta

Harry Thornley estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 36