Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1687 / A1634. La Reparación de este dispositivo es similar a las generaciones anteriores, requiriendo destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16, 64 o 128 GB / Silver, Gold, Space Grey o Rose Gold.

Preguntas 1004 Ver todo

iPhone 6s not powering on, but charging at 0.67A

Last day I’ve tried to charge my iPhone after it went completely black after consuming all its power. Surprisingly, it would not show any sign of charging and after several hours plugged to the wall, it would not power on, at all.

I tried to manually charge the battery and this sort of fixed the problem, making the phone power on, but when I tried to charge it via usb cable, it started to discharge rather than charging.

I checked the charging current with an Ammeter and it was showing 0.67A (note that my Samsung galaxy S9 is charging at 0.40A).

What would the problem be?

P.S. : I also tried to clean up the charging port.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

You can try disconnecting the battery from the phone when the phone is on and charging, this will tell you how much current is actually going to the battery rather then used up by the phone. It’s possible that it really isn’t charging the battery at all. One of the common issues on the iPhone 6s is a chip known as tristar which can fail and will prevent the battery from charging correctly.

Fue útil esta respuesta?

Puntuación 1

Comentarios:

Done that, and the current stays the same, as you probably expected.

I will try to get a replacement for tristar chip.

Thanks mate!

- de

Agregar un comentario

Añadir tu respuesta

ElectroBOOM estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 62