Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Lanzado en junio de 2017, el iPad Pro 10.5 "reemplaza al iPad Pro 9.7 2016".

Preguntas 56 Ver todo

Is there a good way to ensure adhesion to frame near charging port?

I was recently put on the task of repairing a bunch of broken iPads at work and so far the iPad 10.5s have been the biggest struggle. The primary issue I've been running into is a roughly 2 inch width region of the screen seems to not adhere to the frame above the charging port. I've been using a Prime Tech Tools mobile repair vice to apply even pressure to the screen, as well as Tesa tape and adhesion promoter. The rest of screen/frame mount points adhere brilliantly, it's just the one spot causing trouble. Any advice or a point in the direction of a guide that may address this more closely would be greatly appreciated.

N. Batson

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

Kits para Nintendo Switch

Una solución rápida para volver al juego

Comprar kits de Switch

1 Respuesta

Most screens have an adhesive that has to be heated to a certain temperature with a heat gun to adhere properly.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Unfortunately this doesn't seem to be the issue, I've been applying heat with a heat gun prior to clamping the device to no avail.

Thanks for the help,

N. Batson

- Por

Agregar un comentario

Añadir tu respuesta

akwonder1 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 12