Saltar al contenido principal

Lanzado el 4 de noviembre de 2017. Modelo A1865, A1901. Disponible como GSM o CDMA / 64 o 256 GB / Silver o Space Gray. (Se pronuncia igual que "iPhone 10.")

Preguntas 1196 Ver todo

Blurred camera after replacing back glass

Hello everyone,

Probably not done the best repair work of my life here, and I know there are other methods of changing the iphone X back glass, but I used the “Heat-gun” method

Having a severely cracked back glass, Using a hot air gun to remove the adhesive I was able to remove all of the glass and remaining fragments WITHOUT touching or moving the camera lens cover…. the issue now that trying the camera app (or any that use the rear camera) it seems to focus in a blurred manner.

My question here would be…. what is the most likely cause? I would assume the camera assembly may have overheated and now caused the blurr ?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Yes, you have fried the rear camera. it should be removed as very sensitive to heat.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I have this problem too, so how you solve that? Change the new camera?? :((

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

kristian estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 1,912