Repara tus cosas Comunidad Tienda

Apple Watch Series 2, anunciado el 7 de septiembre de 2016 y lanzado el 16 de septiembre de 2016.

Preguntas 132 Ver todo

Opciones

Apple Pay not working after screen replacement

Hi!


I replaced a screen on my Series 2 and now I can’t add any card to Apple Pay. I get a “Can’t set up Apple Pay” message with no additional info. All the flex cables are connected and I factory reset the Watch after screen replacement. I’m not sure if Apple implemented NFC lock (when you have to transfer NFC chip from the old screen to the new one) on Series 2 or it’s just a software bug. The screen I used comes from another S2 Apple Watch with fully functional Apple Pay (with this very screen).

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

There are issues, and yes they are usually fixed by transferring the NFC chip from the old display to the new one. iFixit also states (at the beginning of this guide: Reemplazo de Pantalla de Apple Watch Series 2):

Replacing the display can cause issues with Apple Pay. If possible, to reduce the likelihood of problems, delete all your ApplePay account info before the replacement, and then re-enter it with the new display installed.

Could be worth a shot as well, I’ve never tried it.

This was a Series 2 specific issue. I believe the NFC chip on the Series 3 and newer is a part of the main board, probably for this reason.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Nikki estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 18

Todo El Tiempo: 1,186