Saltar al contenido principal

Guías para la versión Wi-Fi del iPad Mini 3 (A1599). Anunciado el 16 de octubre de 2014, el iPad Mini 3 es el sucesor del iPad Mini Retina (ahora conocido como iPad mini 2).

Preguntas 61 Ver todo

Front panel won’t close flash at digitizer ribbon cable area

Can’t complete front panel replacement. Home button & digitizer ribbon cables won’t let me close front panel against chassis. Any suggestions how to place those ribbon cables so they are not on the way?

Block Image

Block Image

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
2 comentarios

Make sense. You can tell how bended original cables was. I’ll try to fit them underneath chassis empty space.

- de

Yeah it’s really tricky. Just to be safe I used heat gun to make ribbon cables more flexible and accurately fit cables underneath chassis and digitizer fit perfectly in place .

- de

Agregar un comentario

1 Respuesta

Solución Elegida

Is it the Touch Screen flex cable that is on the way preventing to proper assembly?

If yes, they go “hidden” behind the LCD and a little part goes hidden “inside” the chassis.


Is tricky and very hard to explain in words how to do it. I would recommend to look up for some videos “iPad Mini 3 Screen Replacement” and attention to details, this is the most important one.

Good luck!

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

bohdanhl93 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 72